TH Series Temperature And Humidity Controller


āļˆāļģāļ™āļ§āļ™
āļĢāļēāļĒāļĨāļ°āđ€āļ­āļĩāļĒāļ”āļŠāļīāļ™āļ„āđ‰āļē

Model Illustration

 

Model

No.Model No.Temp & Humi control outputTemp &
Humi
alarm
output
Comm
RS485
Normal
supply
RELAYSSR4ï―ž20mA0-10V
1TH9/80[]-RC18[]*


***
2TH9/80[]-RC10[]*


*
*
3TH9/80[]-SC18[]
*

***
4TH9/80[]-SC10[]
*

*
*
5TH9/80[]-DC18[]

*
***
6TH9/80[]-DC10

*
*
*
7TH9/80[]-VC18[]


***
8TH9/80[]-VC10[]


**
 
9TH9/80[]-RA18[]*    **
10TH9/80[]-RA10[]*     *
11TH9/80[]-SA18[] *   **
12TH9/80[]-SA10[] *    *
13TH9/80[]-DA18[]  *  **
14TH9/80[]-DA10[]  *   *
15TH9/80[]-VA18[]   * * 
16TH9/80[]-VA10[]   *   
17TH9/80[]-A18[]     **
18TH9/80[]-A10[]      *
19TH7[]-RC18[]*   ***
20TH7[]-RC10[]*   * *
21TH7[]-RA18[]*    **
22TH7[]-RA10[]*     *
23TH7[]-SA18[] *   **
24TH7[]-SA10[] *    *
25TH7[]-DA18[]  *  **
26TH7[]-DA10[]  *   *
27TH7[]-VA18[]   * * 
28TH7[]-VA10[]   *   
29TH7[]-A18[]     **
30TH7[]-A10[]      *
31TH3[]-RA18[]*    **
32TH3[]-RA10[]*     *
33TH3[]-A18[]     **
34TH3[]-A10[]      *

*ïžšStandard features

[ ]ïžšPower AC/DC100-240V (default), AC/DC24V (customized) Sensor type options A (default), B, C

 

Specifications

Electrical parameters

Control outputRelay output, SSR output, DC 4-20mA output, DC 0-10V output (customized)
Relay capacityAC250V /2A rated load life is greater than 100,000 times (resistive load)
Power supply100 ï―ž 240V AC/DC85-265V、AC/DC 24Vcustomized
Power consumption< 6VA
EnvironmentIndoor, temperature: 0~50 no condensation, humidity: <85%RH Altitude>2000m
Storage Environment-10 ï―ž 60 no condensation
SSR outputDC 24V pulse voltage, Load<30mA
Current outputDC 4 ï―ž 20mA load< 500ÎĐ
CommunicationRS485, Modbus-RT protocol
Current outputInput, output, power VS meter cover ïžž20MÎĐ
CommunicationRS485, Modbus-RT protocol
Insulation impedanceInput, output, power VS meter cover ïžž20MÎĐ
ESDIEC/EN61000-4-2 Contact Âą4KV /Air Âą8KV perf.Criteria B
Pulse traip antiinterferenceIEC/EN61000-4-4 Âą2KV perf.Criteria B
Surge immunityIEC/EN61000-4-5 Âą2KV perf.Criteria B
Voltage drop & short
interruption immunity
IEC/EN61000-4-29 0% ï―ž 70% perf.Criteria B
Isolation strengthSignal, output and power: 1500VAC 1min,
between lower than 60V circuits, DC500V,1min
Panel materialThe shell & panel frame PC/ABS (Flame Class UL94V-0)
Power failure memoryPET(F150/F200)
Panel Protection level10 years, time of writing: 1 million times
Panel Protection levelIP65(IEC60529)
Safety StandardIEC61010-1, Overvoltage category II, pollution level 2,
Level II ( Enhanced insulation)

 

Parameters of temperature and humidity sensor:

Power SupplyMinimum value 3.3V, Maximum value 5.5V
Temp measurement
Range
Physical range: -40.0~1250.0°C , safe range: -40~80.0°C,resolution: 0.1°C
Humi measurement
Range
0.0~100.0% RH; Resolution: 0.1RH
Temp AccuracyWithin 0.0~80.0°C,Typical value ¹0.2°C,Maximum value: ¹0.4°C
Humi Accuracywithin 0.0~90.0%RH, Typical value: Âą2%RH, Maximum value: Âą2.5%RH
Wire LengthStandard: 2M; maximum length with the lead  3 meters

 



āđ€āļ§āđ‡āļšāđ„āļ‹āļ•āđŒāļ™āļĩāđ‰āļĄāļĩāļāļēāļĢāđƒāļŠāđ‰āļ‡āļēāļ™āļ„āļļāļāļāļĩāđ‰ āđ€āļžāļ·āđˆāļ­āđ€āļžāļīāđˆāļĄāļ›āļĢāļ°āļŠāļīāļ—āļ˜āļīāļ āļēāļžāđāļĨāļ°āļ›āļĢāļ°āļŠāļšāļāļēāļĢāļ“āđŒāļ—āļĩāđˆāļ”āļĩāđƒāļ™āļāļēāļĢāđƒāļŠāđ‰āļ‡āļēāļ™āđ€āļ§āđ‡āļšāđ„āļ‹āļ•āđŒāļ‚āļ­āļ‡āļ—āđˆāļēāļ™ āļ—āđˆāļēāļ™āļŠāļēāļĄāļēāļĢāļ–āļ­āđˆāļēāļ™āļĢāļēāļĒāļĨāļ°āđ€āļ­āļĩāļĒāļ”āđ€āļžāļīāđˆāļĄāđ€āļ•āļīāļĄāđ„āļ”āđ‰āļ—āļĩāđˆ āļ™āđ‚āļĒāļšāļēāļĒāļ„āļ§āļēāļĄāđ€āļ›āđ‡āļ™āļŠāđˆāļ§āļ™āļ•āļąāļ§ āđāļĨāļ° āļ™āđ‚āļĒāļšāļēāļĒāļ„āļļāļāļāļĩāđ‰
āđ€āļ›āļĢāļĩāļĒāļšāđ€āļ—āļĩāļĒāļšāļŠāļīāļ™āļ„āđ‰āļē
0/4
āļĨāļšāļ—āļąāđ‰āļ‡āļŦāļĄāļ”
āđ€āļ›āļĢāļĩāļĒāļšāđ€āļ—āļĩāļĒāļš
Powered By MakeWebEasy Logo MakeWebEasy