Flexem F5-MA0402A

Input: 4 Output: 2 Enclosure Material: Engineering plastic Programming Architecture: IEC61131-3

āļˆāļģāļ™āļ§āļ™
āļĢāļēāļĒāļĨāļ°āđ€āļ­āļĩāļĒāļ”āļŠāļīāļ™āļ„āđ‰āļē

Specs

Hardware

Input4
Output2
Resolution16-bit
Input/Output Signal RangeInput: voltage -10~10V, current 0~20mA; output: voltage 0~10V, current 0~20mA
Full-scale Value RangeCustomizable (-30000~30000)
Conversion PrecisionInputÂą0.2%, OutputÂą0.5% (full-scale range)
Maximum Allowable Input SignalVoltage: 30V, current: 30mA
Input ImpedanceVoltage > 200k ohms, current < 250ohms Âą5%
Allowable Output Load RangeVoltage > 2k ohms, current < 500ohms Âą5%
Rated Voltage24VDC -15%/+20%, maximum of 3.2W. Provided internally in the main unit, no external input required
Wiring StrucutreDetachable terminal block
UsageAttached on the right side of FL5/FC5 series main units

 

Environmental

Operating Temperature-10~60°C
Storage Temperature-20~70°C
Environmental Humidity5~95%RH (non-condensing)

 

Mechanical

InstallationDirectly installed on DIN 46277 rail (width 35mm) or fixed with screws
Dimensions66mm×90mm×83mm

 

Size



āļŠāļīāļ™āļ„āđ‰āļēāļ—āļĩāđˆāđ€āļāļĩāđˆāļĒāļ§āļ‚āđ‰āļ­āļ‡

āđ€āļ§āđ‡āļšāđ„āļ‹āļ•āđŒāļ™āļĩāđ‰āļĄāļĩāļāļēāļĢāđƒāļŠāđ‰āļ‡āļēāļ™āļ„āļļāļāļāļĩāđ‰ āđ€āļžāļ·āđˆāļ­āđ€āļžāļīāđˆāļĄāļ›āļĢāļ°āļŠāļīāļ—āļ˜āļīāļ āļēāļžāđāļĨāļ°āļ›āļĢāļ°āļŠāļšāļāļēāļĢāļ“āđŒāļ—āļĩāđˆāļ”āļĩāđƒāļ™āļāļēāļĢāđƒāļŠāđ‰āļ‡āļēāļ™āđ€āļ§āđ‡āļšāđ„āļ‹āļ•āđŒāļ‚āļ­āļ‡āļ—āđˆāļēāļ™ āļ—āđˆāļēāļ™āļŠāļēāļĄāļēāļĢāļ–āļ­āđˆāļēāļ™āļĢāļēāļĒāļĨāļ°āđ€āļ­āļĩāļĒāļ”āđ€āļžāļīāđˆāļĄāđ€āļ•āļīāļĄāđ„āļ”āđ‰āļ—āļĩāđˆ āļ™āđ‚āļĒāļšāļēāļĒāļ„āļ§āļēāļĄāđ€āļ›āđ‡āļ™āļŠāđˆāļ§āļ™āļ•āļąāļ§ āđāļĨāļ° āļ™āđ‚āļĒāļšāļēāļĒāļ„āļļāļāļāļĩāđ‰
āđ€āļ›āļĢāļĩāļĒāļšāđ€āļ—āļĩāļĒāļšāļŠāļīāļ™āļ„āđ‰āļē
0/4
āļĨāļšāļ—āļąāđ‰āļ‡āļŦāļĄāļ”
āđ€āļ›āļĢāļĩāļĒāļšāđ€āļ—āļĩāļĒāļš
Powered By MakeWebEasy Logo MakeWebEasy