Product description
Datasheet
Control characteristic | Max. Output Frequency | 500Hz |
| Carrier Frequency | 0.5kHz ~16kHz; it can adjust load frequency automatically according to the load character | |
| Control Mode | V/F control; SVC control; torque control | |
| Starting Torquee | G load type: 0.5Hz/150%ïžSVCïžP load type: 0.5Hz/100% | |
| Speed Adjustable range | 1:100 ïžSVCïž | |
| Speed-holding Precision | Âą0.5%ïžSVCïž | |
| Overload capacity | G load type: 60s for150% rated current; 1s for180% rated current P load type: 60s for120% rated current; 1s for 150% rated current | |
| Torque boost | 0.0% auto torque boost; customized torque boost 0.1%ï―30.0% | |
| V/F curve | Three types: linear, multipoint, square V/F curve | |
| V/F separation | Whole separation, semi separation | |
| Acceleration and deceleration Time | Linear mode and S curve acceleration and deceleration mode; four groups of acceleration and deceleration time; the range of acceleration and deceleration time is 0.0ï―6500.0s | |
| DC braking | Braking time: 0.0sï―100.0s; braking current value: 0.0%ï―100.0% | |
| JOG control | JOG frequency range: 0.00Hzï―max frequency; JOG acceleration and deceleration time 0.0sï―6500.0s | |
| Simple PLC,multi-speed control | Up to 16 steps speed can be realized by integrated simple PLC and control terminals function | |
| Integrated PID | Closed-loop control system | |
| AVR | When grid voltage changes, it keeps output voltage constant automatically | |
| Control of overvoltage, overcurrent, speed stall | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/overcurrent | |
| Rapid current limit | Decrease overcurrent at max, protect VFD to operate regularly | |
| Torque limit and control | Limit the torque automatically and prevent frequent over current tripping during the running process | |
| Power peripheral and safety self-checking | To realize self checking of peripheral equipment at power on, such as grounding fault, short circuit fault, etc | |
| MF.K Key | Programmable: command channel switching, forward rotation and reverse rotation, JOG function selection | |
| Textile swing frequency control | Control function of triangular-wave frequency | |
| Timing control | Timing control range: 0hï―65535h | |
| Input/output | Operation command channel | Three channels: operation keypad, control terminal, and communication. It can be switched by various methods |
| Frequency source | 10 frequency sources: digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting etc. It can be switched by these frequency sources in various methods | |
| Auxiliary frequency source | Ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis | |
| Input terminal | 6 digital input terminals. One of them can be used as high speed pulse input, which can reach 100KHz at max All of them support PNP and NPN input. 2 analog input (AI) terminals, one of which only supports voltage input and the other supports voltage input or current input | |
| Output terminal | 1 High-speed pulse output terminal (open-collector) that supports 0-100 kHz square wave signal output 2 relay outputs. 2 analog outputs (AO) terminal that supports 0/4mA20 mA current output or 0/2V10 V voltage output | |
| Display and panel operation | LED display | Displayed parameters |
| LCD display | Optional; operation content indicated | |
| Parameters copy | Parameters fast copy via LCD keypad | |
| Key locking and function selection | It can lock the keys partially or completely and define the function range of some keys so as to prevent mis-operation | |
| Protection function | Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection and overload protection etc | |
| Accessories selection | LCD operation keypad, braking unit etc | |
| environment Application | Installation location | Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt |
| Altitude | Lower than 1000m, derating if higher than 1000m | |
| Ambient temperature | -10°C to +40°C (derating if the ambient temperature is between 40°C and 50°C) | |
| Humidity | Less than 95%RH, without condensing | |
| Vibration | Less than 5.9m/s2(0.6g) | |
| Storage temperature | ïž40ï―ïž70 |
Model number description
Specification and selection guide
| Voltage grade | Power | Rated intput current(A) | Rated output current(A) | Struc -ture No. | Series No. | 2:220V 4:380V | S:single | Adaptive motor power | G: general type | B: integrated with brake function Blank: optional brake function | ||
| kW | HP | |||||||||||
| Single phase 220VAC Âą15% | 0.75 | 1 | 8.2 | 4.5 | 1 | VM1000 | - | 2 | S | 0.75 | G | B |
| 1.5 | 2 | 14.2 | 7 | 1 | VM1000 | - | 2 | S | 1.5 | G | B | |
| 2.2 | 3 | 23 | 10 | 1 | VM1000 | - | 2 | S | 2.2 | G | B | |
| Three phase 380VAC Âą15% | 1.5/2.2 | 2/3 | 5.0/5.8 | 3.8/5.1 | 1 | VM1000 | - | 4 | T | 1.5/2.2 | G/P | B |
| 2.2/3.7 | 3/5 | 5.8/10.5 | 5.1/9 | 1 | VM1000 | - | 4 | T | 2.2/3.7 | G/P | B | |
| 3.7/5.5 | 5/7.5 | 10.5/14.6 | 9/13 | 1 | VM1000 | - | 4 | T | 3.7/5.5 | G/P | B | |
| 5.5/7.5 | 7.5/10 | 14.6/20.5 | 13/17 | 2 | VM1000 | - | 4 | T | 5.5/7.5 | G/P | B | |
| 7.5 | 10 | 20.5 | 17 | 2 | VM1000 | - | 4 | T | 7.5 | G | B | |
| 11 | 15 | 26 | 25 | 2 | VM1000 | - | 4 | T | 11 | P | B | |
| 11/15 | 15/20 | 26/35 | 25/32 | 3 | VM1000 | - | 4 | T | 11/15 | G/P | B | |
| 15/18.5 | 20/25 | 35/38.5 | 32/37 | 3 | VM1000 | - | 4 | T | 15/18.5 | G/P | B | |
| 18.5/22 | 25/30 | 38.5/46 | 37/45 | 4 | VM1000 | - | 4 | T | 18.5/22 | G/P | B | |
| 22/30 | 30/40 | 46.5/62 | 45/60 | 4 | VM1000 | - | 4 | T | 22/30 | G/P | B | |
| 30/37 | 40/50 | 62/76 | 60/75 | 5 | VM1000 | - | 4 | T | 30/37 | G/P | ||
| 37/45 | 50/60 | 76/92 | 75/91 | 5 | VM1000 | - | 4 | T | 37/45 | G/P | ||
| 45/55 | 60/70 | 92/113 | 91/110 | 6 | VM1000 | - | 4 | T | 45/55 | G/P | ||
| 55/75 | 70/100 | 113/157 | 112/150 | 6 | VM1000 | - | 4 | T | 55/75 | G/P | ||
| 75/90 | 100/125 | 157/180 | 150/170 | 7 | VM1000 | - | 4 | T | 75/90 | G/P | ||
| 90/110 | 125/150 | 180/214 | 170/210 | 7 | VM1000 | - | 4 | T | 90/110 | G/P | ||
| 110/132 | 150/180 | 214/256 | 210/253 | 7 | VM1000 | - | 4 | T | 110/132 | G/P | ||
| 132/160 | 180/220 | 256/307 | 253/304 | 8 | VM1000 | - | 4 | T | 132/160 | G/P | ||
| 160 | 220 | 307 | 304 | 8 | VM1000 | - | 4 | T | 160 | G | ||
| 200/220 | 275/300 | 385/430 | 377/426 | 9 | VM1000 | - | 4 | T | 200/220 | G/P | ||
| 220/250 | 300/340 | 430/468 | 426/465 | 9 | VM1000 | - | 4 | T | 220/250 | G/P | ||
| 250/280 | 340/380 | 468/525 | 465/520 | 9 | VM1000 | - | 4 | T | 250/280 | G/P | ||
| 280/315 | 380/430 | 525/590 | 520/585 | 9 | VM1000 | - | 4 | T | 280/315 | G/P | ||
| 315/355 | 430/480 | 590/665 | 585/650 | 10 | VM1000 | - | 4 | T | 315/355 | G/P | ||
| 355/400 | 480/545 | 665/785 | 650/725 | 10 | VM1000 | - | 4 | T | 355/400 | G/P | ||
| 400 | 545 | 785 | 725 | 10 | VM1000 | - | 4 | T | 400 | G | ||
āļŠāļīāļāļāđāļēāļāļĩāđāđāļāļĩāđāļĒāļ§āļāđāļāļ
āđāļāļĢāļĩāļĒāļāđāļāļĩāļĒāļāļŠāļīāļāļāđāļē
0/4
āļĨāļāļāļąāđāļāļŦāļĄāļ
Powered By
MakeWebEasy
MakeWebEasy