Remond RS485 LPR Corrosion Rate Sensor for Cooling and Process Water Treatment
Digital Corrosion Rate Sensor RS485 and 4-20mA Online LPR Corrosion Rate Sensor Probe Meter for Circulation Cooling Water
āļĢāļēāļĒāļĨāļ°āđāļāļĩāļĒāļāļŠāļīāļāļāđāļē
Corrosion rate sensor features:
- MODBUS 485 and 4-20mA output
- Measure range( 0...0.25 ,0...0.5 ,0...1 ,0...5) mm/a ( Can be modified )
- Pitting corrosion and average corrosion can be measured at the same time
- Combining Linear Polarization Resistance (LPR) with AC Impedance Spectroscopy (EIS)
- Internal signal isolation technology, strong anti-interferenceAdvanced anti-polarization technology
- IP68 protection grade
- Power supply DC9-30V
- Low drift, fast response
- Easy installation
- Stable performance and long service life
Corrosion rate sensor probe technical parameter
| Measuring range | 0...0.25mm/a 0...0.5mm/a 0...1mm/a |
| Measure principle | LPR and EIS |
| Accuracy | 0.0001 |
| Temperature range | 0...60.0°C |
| Response time | 50s |
| Power supply | DC12V,DC24V |
| Cable length | 5m |
| Pressure range | 0...3bar |
| Calibration method | Laboratory comparison |
| Protection grade | IP68 |
| Output signal | RS485,4-20mA |
| Thread | G1 |
| Probe type | copper, carbon steel, stainless steel |
| Shell material | Stainless steel |
Remond
RS485
pH Sensor
Remond RS485 LPR Corrosion Rate Sensor for Cooling and Process Water Treatment
RS485 LPR Corrosion Rate Sensor for Cooling and Process Water Treatment
PR Corrosion Rate Sensor
āļŠāļīāļāļāđāļēāļāļĩāđāđāļāļĩāđāļĒāļ§āļāđāļāļ
āđāļāļĢāļĩāļĒāļāđāļāļĩāļĒāļāļŠāļīāļāļāđāļē
0/4
āļĨāļāļāļąāđāļāļŦāļĄāļ
Powered By
MakeWebEasy
MakeWebEasy