Equipment used with Loadcell Indicator (EP3101-K) to create an IoT system

Last updated: 13 Nov 2024
274 Views

Loadcell usage for general types of work may require different number of Loadcells. When only one load cell is used, it can be connected to the Indicator. However, for some types of work that require 3-6 or more Loadcells, the method may be to tie the cables together and then enter the Indicator screen. If we have a device called a Summing Box or Junction Box, it will make our work more convenient and easier.

Summing Box, or Junction Box, is a device that combines the signal cables of load cells, It can combine the input signal from 4-8 load cells, depending on the model and size. It has a single output that sends a signal to the Indicator reader to recognize the value and display the result. The Summing Box simplifies working and checking the equipment easier if the Loadcell is damaged.

Indicator EP3101-K can connect to other devices, such as a SCOREBOARD DISPLAY, PLC, HMI, etc., using the RS232/485 communication port to use the displayed weight value. Additionally, it can display weight values on mobile devices or computers via an IoT system by connecting to the HMI B7H-W (Haiwell) through the Haiwell Cloud system.


Related Content
Working principle of RS232 and RS485 communication
The working principle of RS232 is a standard that receives/sends data in full duplex mode, meaning that both parties can receive and send data at the same time. The transmission/receiving of data uses a total of 3 wires.
15 Nov 2024
Cloud data Center (Haiwell)
In the past, when connecting various devices to communicate with each other, many people probably thought that there was only a connection through signal cables through a serial port. Whether it is the RS-232, RS-485, RS-422 standard, they can connect various devices and communicate with each other through signal cables. But all of the communication mentioned above has a limitation, which is "the distance between devices".
15 Nov 2024
Basic selection of Inverter (VFD) to control Induction Motor
Inverter is a device used to control or reduce the speed of a 3-phase AC motor of the magnetic induction type (Induction Motor 3Phase). The main uses are to start and stop the motor, reduce the motor speed (0-50Hz or 0-100%), adjust the left and right rotation direction of the motor (Forward -Reverse), and some models are used to control the water pressure of the water pump (AC 3 Phase) with the PID Controller system, etc. It can adjust the settings, apply to a variety of applications, connect data to control the speed and direction via PLC or other devices.
15 Nov 2024
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว and นโยบายคุกกี้
Compare product
0/4
Remove all
Compare
Powered By MakeWebEasy Logo MakeWebEasy