HPT604-FW Water In Fuel Sensor

Product description

Download

The HPT604-FW Water in fuel sensor (WIF sensor) are mainly used in water existence, fuel level and fuel temperature monitoring in fuel tanks. It is made by imported high stable and reliable OEM piezo-resistive pressure sensor with water detect sensors and high accurate circuit board into the stainless steel housing.

Application :

Water Detector/Monitoring of Fuel Tanks
Diesel Tank Level Monitor Systems
Water Under Oil and Fuel Level Monitor
Oil And Water Separation Location Detection
Position Detector Of Silt Layer
Water Level Position Detector

Advantages

01 High accuracy up to 0.25%FS.
02 It can make a distinction between water and oil in fuel tank.
03 High sensitive performance with 316L stainless steel probe tip.
04 It can measure the liquid level, temperature, and alarm when water is detected.
05 It's performance exceeds that of magnetostrictive level sensor with low cost only.

Technical Data

Level range	0m~0.5m20m Optional
Water Exist alarm Output	ohm, or PNP switch, or NPN switch signal output optional. Water detection signal: ohm signal (When>100 Ω, it means that water has been detected, and 0 ohm means no water exists).
Fuel Level Output	4~20mA,0~5V, 0~10V,RS485 Modbus RTU optional
Power Supply	DC 7...30V,DC 8...30V,DC 13...30V,DC 7...30V
Temperature Compensation	0~50°C(Typical),-10~60°C(by customized)
Medium Temp	-30...70 °C
Intrinsic safety Certificate	Exia IICT6
Water Proof Grade	IP68