ROS-2010 RO Program online controller

Categories : JIRS Sensor , RO System Controller

Brands :JIRS

Product description

Short Description:
Conductivity + Temperature Reverse osmosis process controller.
The typical operation modes of various medium and small reverse osmosis systems, adopts high-performance single chip microcomputer technology to monitor RO system operation, status control and water online conductivity.
The control panel visually displays the operation status of the system by visual flow chart with LED indication lamp embedded.
Open operating menu, allow the user to set the washing time of membrane,spacing to meet the users different requirements.
Fault alarm and control output instruction function.

Main Technique Specifications

Model	ROS-2010
RO collecting point	No water protection, low pressure protection, high pressure protection, pure water tank high level protection, exterior operation, reset
RO controlling point	Inlet water valve, flush valve,raw water pump, high pressure pump, conductivity over limit discharge valve
Measurement Range	Conductivity : 0 ~ 20μS/cm, 0 ~ 200μS/cm, 0 ~ 2000μS/cm, Temperature: 0~50°C
Resolution ratio	Conductivity 0.1μS/cm, Temperature 0.1°C
Accuracy	Conductivity 1.5%, Temperature 0.5°C
Temperature compensation	automatic digital compensation with 25°C as reference temperature
Working environment	Ambient Temp. 0 ~ 50°C, Relative Humidity 85%
Electrode	1.0cm-1 electrode, with 5m Length cable
Electric control	ON single contact relay, dry contact (on power) inside output
Flush way	High pressure flush, low pressure flush
Display	3 1/2 digits red LED digital display
Contact capacity	AC 250V/3A Max；AC 115V/10A Max (Resistance load)
Power	AC 220V+-15% 50Hz
Dimensions	96×96×130mm (H X W X D)
Hole size	92×92mm (H X W)(Embedded)