FCC-300 Coriolis Effect Mass Flow Meter For Oil, Gas, Liquid Processing

FCC-300 Coriolis Effect Mass Flow Meter For Oil, Gas, Liquid Processing

A Coriolis effect mass flow meter is an advanced precision device that measures mass flow rate, density, and temperature of fluids in closed pipelines. Operating on the principle of Coriolis force, it provides accurate measuring solutions and readings for a wide range of industries, including chemical, petroleum, water treatment, food and beverage, pharmaceuticals, paper manufacturing, renewable energy production, and more. This micro motion Coriolis mass flow meter adheres to the GB/T 31130-2014 standard for mass flow measurement, ensuring reliable and consistent performance across applications.

Quantity

Categories : Sensor , Flowmeter , Coriolis mass flowmeter

Brands :Supmea

Product description

Download

Characteristics

Ideal for High-Viscosity Fluids: Suitable for slurries and suspensions
Precise Measurements: No need for temperature or pressure compensation
Superb Design: Corrosion-resistant and durable
Wide Applications: Oil, gas, chemical, food and beverage, pharmaceuticals, water treatment, renewable energy production
Easy to Use: Simple operation, easy installation, and low maintenance
Advanced Communication: Supports HART and Modbus protocols

Specifications

Diameter	U-type:DN20~DN150; Triangular:DN3~DN15; Straight Tube:DN8~DN80
Measurand	Mass flow, density, temperature
Density accuracy	Earth 0.002g/cm³
Accuracy	0.1%,0.15%,0.2%
Temperature	-40~+60
Power consumption	<15W
Power supply	220VAC ； 24VDC
Signal output	4~20mA, RS485, HART
Ingress protection	IP67
Density range	(0.3~3.000)g/cm³
Repeatability	1/2 of the measurement error
Medium temperature	Standard type: (-50 ~ 200); (-20 ~ 200); High temperature type: (-50 ~ 350); Low-temperature type: (-200 ~ 200)
Process pressure	(0~4.0)MPa
Humidity	35%~95%
Transmission output	(4 ~ 20) mA, output load (250 ~ 600) Ω

Product Parameter

Measured variables	Mass flow, density, temperature
Nominal caliber	Straight Tube:DN8~DN80; U-type:DN20~DN150; Triangular:DN3~DN15
Flow rate range	Refer to tables 2 and 3
Density range	(0.3~3.000)g/cm³
Temperature measurement range	(-200~300)°C
Transmission output	(4～20) mA, output load (250～600) Ω
Communication output	RS485 interface, MODBUS-RTU communication protocol; Hart
Frequency (pulse) output	Pulse width: 50% Active: output current 10mA, open circuit voltage 24V''
Power supply	24VDC/220VAC
Power consumption	15W
Electrical Interface	M20*1.5
Accuracy	Flow rate: 0.2%, 0.15%, 0.2%;Density: ±0.002g/cm³; Temperature: ±1°C
Repeatability	1/2 of the measurement error
Medium temperature	Standard type: (-50～200)°C, (-20～200)°C; High temperature type: (-50～350)°C; Low-temperature type: (-200～200)°C;
Process pressure	(0~4.0)MPa
Pressure Loss	Maximum flow rate corresponds to a pressure loss of 100kPa (with water as the medium)
Temperature	-40°C~+60°C
Humidity	35%~95%
Protection class	IP67