REMOND Industrial Online RS485 pH Probe 4-20mA PPS Shell pH Electrode Water Treatment ph Sensor Probe

Short Description

  • pH refers to the acidity or alkalinity of an aqueous solution, specifically the concentration of hydrogen ions. The value varies from 0 to 14. Less than 7 is acidic, greater than 7 is alkaline, and equal to 7 is neutral.

    pH sensor is a sensor used to detect the concentration of hydrogen ions in the measured substance and convert it into a corresponding usable output signal.

    A pH sensor typically consists of a chemical component and a signal transmission component. PH sensors are commonly used for industrial measurements of substances such as solutions and water.

Product description

Product Description

        • Power supply DC9-30V
        • 4-20mA output signal
        • Support RS-485, Modbus/RTU protocol
        • IP68 protection, waterproof
        • Quick response, high precision
        • 7*24 hours online continuous monitoring
        • Easy installation and easy operation
        • Different measuring range can meet different requirements
pH sensor technical parameter:
ModelRMD-TSHP105
pH Measuring range :0...14pH
Resolution :0.01pH
Accuracy :±0.02pH
Temp measure range :0...60°C
Resolution :0.1°C
Accuracy :±0.3°C
Temperature compensation :Automatic
Power supply :DC9-30V
Output :4-20mA
Pressure range :0-3bar
Data communication :RS485 (MODBUS-RTU)
Shell material :PPS
Thread :G3/4, NPT3/4
Cable length :5m default
Install :Immersion type


เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว and นโยบายคุกกี้
Powered By MakeWebEasy Logo MakeWebEasy